Waterproof Roof Coating Systems for Industrial and Commercial Low-Slope Roofing
Before selecting a roof coating for your next commercial project, here are some things to take into consideration.
1. Perm Ratings- For a coating to be waterproof, the perm rating should be less than 1.0. If the product you want to use reads 1.0 or higher, the coating is not technically waterproof.
What is Perm Rating? A perm rating is the unit telling us the mass rate of water vapor flowing through one square foot of material, the higher the number the less waterproof the material is.
Why do Perm Ratings matter? A roof covered with a product that has a higher perm rating is more likely to encounter roof leaks and damage due to ponding water and condensation.
2. Appearance – You want to ensure that the product you select is able to deliver a monolithic, UV stable, renewable surface.
3. Warranty – Comparing the available warranties between products and brands is a must when selecting a roof system. Whether you are a building owner or a professional roofing contractor, the right warranty will give you peace of mind after the job is complete, so reading and fully understanding the fine print is also a must. Another thing to keep in mind is what is “promised” vs. “reality” doesn’t always match up, so always ask to see the actual warranty prior to purchasing any product.
4. Cost – The types of roof systems out there are endless, and the costs of the products are not the only costs affecting your project. Ensure the product you choose for your next commercial roof project is not only cost-effective, but that the installation time and labor cost-factors are also taken into consideration.
5. Compatibility of new roof material over the existing substrate – Not all roof systems can be applied over the existing roof, and tear-offs can be labor-intensive and costly when it comes to old material disposal fees.
With all these things in mind, here is how SureCoat Systems’ products are the right choice for your next commercial project.
- The SureCoat Roof System is a monolithic single-ply roof restoration system that is waterproof throughout the entire system. It is a single-component, UV stable epoxy-hybrid roof coating with a perm rating of only .0025 which qualifies as a Class 1 waterproofer. Zero moisture can pass through a SureCoat Roof System. SureCoat exceeds all Title 24 and other energy standards, and is a Super VOC Compliant coating product with the SCAQMD.
- Because SureCoat is an epoxy-hybrid engineered coating, not just a white acrylic roof paint. The SureCoat Roof System (monolithic single-ply coating) membrane is energy efficient and waterproof from the first ply to the top ply.
- Whether it is our 10, 15 or 20-year Renewable Warranty when installed by an approved contractor, SureCoat is energy efficient and waterproof for the entire life of the system. SureCoat Roof Systems are the only roof systems with a warranty that covers ponding water on flat and low-sloped roofs, and best of all, it is not prorated. The same cannot be said about other roof types, such as built-up (BUR), rubber (EPDM), or plastics (PVC).
- SureCoat roof coatings can be used over almost any existing roof system including Metal roofs, BUR, Concrete roofs, IRMA roofs, PVC roofs, TPO roofs, EPDM roofs, APP roofs and Hypalon roofs. SureCoat flat roof coating products are perfect for flat and low-sloped roofs, even those in the worst condition.
- SureCoat is also a unique repair system that can easily be added to over time, creating a new flat roof system just by reconditioning the existing roof in phases with SureCoat.

Before picture (left) showing original Hypalon roof. After (right) showing the newly installed SureCoat Roof System with solar panels installed over the top. The SureCoat Roof System reconditioned this existing roof to a “better than new” condition with a written 15-year renewable manufacturer’s warranty. This 15-year system was specifically designed to be installed under solar panels. Read more here.
Did you know that SureCoat Roof Systems are the longest-lasting roof coating solutions for commercial and industrial low-slope roofs that you can find in the USA?
Call 877-BE-SURE today to learn how SureCoat Systems can help your next commercial roof project be your BEST roof project yet!
Don’t Lose Contracts Because of Overbidding
Offer your customers a premium product and great service while saving them money!
The bidding process can be a stressful task to tackle, you don’t want to undercharge and find your business at a financial risk later on, but you don’t want to lose the bid to another contractor because you over-estimated the cost of labor and materials.
Below are some key items worth taking into consideration when bidding a project with SureCoat Systems’ coatings:
- SureCoat Systems provides high-quality materials with long proven track records. This means you won’t be spending your profits going back and repairing low-grade cheap products.
- It is one of the only Class 1 waterproof hybrid elastomeric coatings on the market. SureCoat Systems offers a warranty that covers ponding water and can legally be applied in all 50 states.
- Because there is no priming required or mixing of materials, the easy to install SureCoat Roof System has one of the lowest labor costs in the industry.
- Because it is installed over the existing roof surface, that means no roof tear-off, no removing and reinstalling HVAC units, no building code upgrades required, which saves the owner thousands of dollars.
- It is indefinitely renewable with maintenance coats at 10-year intervals as needed. The SureCoat Roof System remains serviceable indefinitely and only requires minimal top coating. This means roofing budgets go down after the initial roof system is installed.
- If the 5 items above aren’t enough, as an approved contractor, you get the best support in the industry. Our technical service team is here for you and will be able to answer all your product They will also provide you with forms and worksheets to make the bidding process a breeze.
Don’t wait any longer, call 877-823-7873 or visit Surecoatsystems.com and get the best value and the help you need to bid on projects quickly and accurately.
WILL YOUR ROOF SURVIVE A FIRE?
WHAT YOU NEED TO UNDERSTAND ABOUT FIRE RATINGS.
Summer is officially here. Along with all the summer fun, comes the heat and a higher potential for fires, and while it is impossible to predict exactly when and where the next fire will happen, being prepared is a must. As a roofing professional you need to ensure your roofs meet certain standards to protect the building and its occupants. In this post, we will look at what fire ratings mean, how they are assigned, and why you should understand them so that you are not fooled by confusing verbiage and marketing gimmicks.
Roof systems are rated from the highest degree of fire resistance designated as Class A; Class B being slightly inferior and Class C falling below that. It’s also worth noting that some roof assemblies are “unrated” which means they don’t meet any of the requirements of any of the above classes.
The American Society for Testing and Materials (ASTM) E108 uses methods and procedures for testing the resistance of roof coverings to fire sources outside the building on which the roof coverings are installed. This test applies to roof coverings on either combustible or noncombustible decks where the roof coverings are installed. The ratings are achieved with realistic fire tests and only apply to the actual roof coverings, not the rest of the roof components. Some building types, such as public buildings like schools or hospitals, may require a Class A rating, whereas other structures might only need to meet a B or C rating.
WHAT COMPONENTS ARE TAKEN INTO CONSIDERATION WHEN DECIDING A FIRE RATING?
The roof coating is just one component in the fire rating of a roof assembly. Other components include:
- Slope
- Substrate
- Whether the roof deck is combustible
- Type of insulation.
These factors as a whole will determine the roof system’s fire rating. Another important consideration is that the products are installed correctly and to manufacturers’ specifications.
Using products such as SureCoat and StrucSureCoat, which pass ASTM E108 and E84 for flame spread, can support your company’s efforts to meet and exceed fire requirements for most if not all of your roofing and wall projects, giving you peace of mind while saving you money on labor, material costs and allowing you to work between storms in the rainy season and working in colder weather.

The roof above was in the path of a recent 4th of July celebration. The wrong roof assembly could have potentially turned into a fire, but on this SureCoat roof, the only damage was the remnants of fireworks littering the roof. No fires here!
As an added benefit, SureCoat and StrucSureCoat have a higher reflectivity, reducing energy costs, and lowering the interior temperature in areas where office and warehouse personnel, computers or other temperature-sensitive equipment are kept.
For more information on our products’ codes and approvals call 877 823-7873 or visit Surecoatsystems.com.
Inspecting Your Roof is Not a Choice, it’s a Must.
Why regular roof inspections may save you time and money
Recently we covered a few of the challenges that contractors face when working on roof repairs. In today’s blog, we go back to the very beginning- Step one: Identify damage by doing regular roof inspections.
One of the most important things about making your roof last, along with selecting the right products, is regular roof inspections. Lack of maintenance is the single largest factor leading to premature roof failures. Regular inspections can help avoid the need for untimely replacements or repairs.
If that weren’t enough, there is another BIG reason for regular inspections. This one hitting where it hurts most, your wallet. The cost of an annual roof preventative maintenance program is between 1 to 2% of the replacement value of the roof. By simply investing that small amount of the replacement cost every year, you increase the expected service life of the roof by a whopping 50 to 100%, which is just sound fiscal management.
Regular roof inspections can help you catch problems while they are still minor and easily fixed to maintain your warranty. Issues that arise from lack of maintenance can void some warranties. Inspections also allow you to take timely action or create a plan to solve the problem based on your available budget. Lastly, roof inspections can also help avoid loss or damage to secondary property such as internal or external equipment, furniture, or even having to shut down your business for a prolonged period of time because of roof major system failures.
So, whether you have mastered the “maintenance gig” with regular inspections or are just now jumping into the “maintenance wagon”, SureCoat Systems can help.
SureCoat Systems can help you assess your roof and can help create an annual report that will notify you of areas that need attention such as delaminated areas, worn waterways and areas where water ponds, cracks and splitting around new or old penetrations, blisters, parapet walls separating and failing, deteriorating caulking, equipment curbs, drains and more.
This report will also help you obtain enough information to plan a budget for future repairs to get the most out of the life of your existing roof.
Best of all, the average regular roof inspection takes approximately 45 minutes. Less than an hour of your day, can save you days or even months of headaches in the future. A roof inspection usually consists of examining the roof surface material as well as carefully assessing underlying areas of the structure such as eaves, chimneys, fasteners, and other vulnerable spots, and although building owners can spot many obviously damaged areas, a trained professional will be able to catch those issues invisible to non-roofing professionals.
So, don’t wait until there is a problem such as rain or winter storm coming your way since that will be the time when roofers are swamped with calls. It’s also the hardest time to find available products that can be applied in wet and cold conditions, and the further deterioration of existing problems can mean spending a lot more money and time than you expected on a repair. Call SureCoat Systems 877-823-7873 or click today for an Approved Contractor in your area, and get ahead of the curb to protect and prolong the life of your existing roof. Let your repairs be the start of your new roof!
Damage Repair 911
A lot of times weather is critical in roofing. If it’s too wet, too snowy, too cold, etc., many roofers shy away from doing certain projects. If you’ve been following along with us on our blog, podcast, or social media, we’ve been sharing tips, strategies, stories and feature projects where our quick curing product, SureSet, saves the day when facing weather challenges. In the following case study, we once again put our quick dry formula to the test to beat the California rainy season and to settle a tenant-landlord dispute.
The Backstory:
The property management company managing a shopping center that consisted of two buildings, one 15,000 sq. ft. and the other 5,000 sq. ft. had been working with us to repair their properties a little bit at a time due to budget restrictions. We would repair the most vulnerable areas and then when the budget allowed, continue to repair. However, the owner was struggling with a failing roof product and warranty that had been issued and did not cover the peeling, cracking and leaking that was occurring.
- DSC00886
- DSC00908
The Challenge:
When new tenants signed a lease for space, they also invested a lot of money in new equipment to help create an appealing environment for their customers. Enter the rain. The roof over this new tenant’s space was one that was previously repaired with the old failing product, and unfortunately, the landlord was unable to properly fix this area before the first rainfall. The leaking was severe and caused damage to the new equipment in the tenant’s space. The landlord was working to get warranty coverage from the company that installed the failed roof coating but was struggling to get them to stand behind their product. Upset with the landlord’s response time, the tenant retained an attorney to help get the owners to solve the roof issue.
- DSC01645
- DSC01655
- DSC01036
The Solution:
Threatened with another rainstorm approaching and the pressure from the tenant, the owners had to find a solution and fast. They reached out to us because they knew our product worked based on the repairs we’ve already done on their roof. The problem was, they weren’t sure if we would take the job because of the impending rain. Most companies would pass. Our innovator Jesse and his JemStar team jumped in to do the work with SureSet. Just 10 hours before the storm hit, his team was installing SureSet and because of the quick dry formulation, when the storm hit, there were no more leaks and no more equipment damage.
The Eight-Step Roof Drain Repair
Discovering a leaking roof drain is just one more annoyance to add to your “to-do” list. As inconvenient as it might seem, it’s one repair item that you should move to the top of your maintenance list. A roof drain is installed on a building to convey stormwater from the roof or deck to the storm drainage sewer or run-off area. Due to the amount of wear and ponding water that occurs around roof drains and in the waterways of the roof, roof leaks are common around these drainage areas. A leaking roof drain can and will cause severe property damage if not addressed quickly and repaired.
Take a look at this roof drain pictured to the right. This is a traditional roof drain found on commercial and industrial flat and low-sloped roofs. This particular roof drain has been repaired several times with mastic and acrylic coating products. These repairs were unable to withstand the UV exposure and ponding water conditions and the roof continued to leak around the roof drain.
The SureCoat Roof System is the proven solution for stubborn roof leaks like those around a roof drain that you dread about repairing time and time again. Why is SureCoat right for this type of repair? Because it is the only true seamless single-ply roofing membrane on the market today that will allow for partial installation and small repairs like this now when they are leaving your roof most vulnerable.
Movement and ponding that will cause roof materials to dry out and elongation to be lost will not happen with SureCoat. Our roof system is made to be a monolithic material with enough elongation in extreme temperatures and weather conditions so that it won’t lose its memory, become brittle and crack.
SureCoat is also a membrane forming material. It is a fully adhered system using high-quality resins that create an extreme bond onto the existing roof and become part of it. No mastics, adhesives, sealants, or other materials are used to install a SureCoat Roof System.
SureCoat consists of only one coating product that cures into a completely seamless, self-flashing, self-adhered, 100% waterproof, cool roof membrane that never needs to be replaced because it’s renewable.
Now on to the good stuff, here’s how to repair a roof drain leak in eight simple steps.
Need help getting started with your repairs? Talk to a SureCoat Systems waterproofing specialist now! Call us at 877-8 BE SURE (7873) or email us at info@surecoatsystems.com.







