WILL YOUR ROOF SURVIVE A FIRE?
WHAT YOU NEED TO UNDERSTAND ABOUT FIRE RATINGS.
Summer is officially here. Along with all the summer fun, comes the heat and a higher potential for fires, and while it is impossible to predict exactly when and where the next fire will happen, being prepared is a must. As a roofing professional you need to ensure your roofs meet certain standards to protect the building and its occupants. In this post, we will look at what fire ratings mean, how they are assigned, and why you should understand them so that you are not fooled by confusing verbiage and marketing gimmicks.
Roof systems are rated from the highest degree of fire resistance designated as Class A; Class B being slightly inferior and Class C falling below that. It’s also worth noting that some roof assemblies are “unrated” which means they don’t meet any of the requirements of any of the above classes.
The American Society for Testing and Materials (ASTM) E108 uses methods and procedures for testing the resistance of roof coverings to fire sources outside the building on which the roof coverings are installed. This test applies to roof coverings on either combustible or noncombustible decks where the roof coverings are installed. The ratings are achieved with realistic fire tests and only apply to the actual roof coverings, not the rest of the roof components. Some building types, such as public buildings like schools or hospitals, may require a Class A rating, whereas other structures might only need to meet a B or C rating.
WHAT COMPONENTS ARE TAKEN INTO CONSIDERATION WHEN DECIDING A FIRE RATING?
The roof coating is just one component in the fire rating of a roof assembly. Other components include:
- Slope
- Substrate
- Whether the roof deck is combustible
- Type of insulation.
These factors as a whole will determine the roof system’s fire rating. Another important consideration is that the products are installed correctly and to manufacturers’ specifications.
Using products such as SureCoat and StrucSureCoat, which pass ASTM E108 and E84 for flame spread, can support your company’s efforts to meet and exceed fire requirements for most if not all of your roofing and wall projects, giving you peace of mind while saving you money on labor, material costs and allowing you to work between storms in the rainy season and working in colder weather.

The roof above was in the path of a recent 4th of July celebration. The wrong roof assembly could have potentially turned into a fire, but on this SureCoat roof, the only damage was the remnants of fireworks littering the roof. No fires here!
As an added benefit, SureCoat and StrucSureCoat have a higher reflectivity, reducing energy costs, and lowering the interior temperature in areas where office and warehouse personnel, computers or other temperature-sensitive equipment are kept.
For more information on our products’ codes and approvals call 877 823-7873 or visit Surecoatsystems.com.
Turn Your Roof Repair into Your Next New Roof
Don’t Stress- Buy a New Roof Over Time
In our last blog we explored the cost benefits and reasons for regular roof inspections. In this blog, we will continue addressing repairs. This time, we will show you how you can use repair expenses toward a brand new, fully warranted roof system.
Some products in the market resolve an immediate need for a “quick fix”, but what if you were able to address your roof issues immediately, affordably and correctly?
SureCoat Systems offers just that! We offer a variety of products that work together to build an integrated full system over time and in stages, so that the cost isn’t prohibitive, and the quality at the end of the project is equal or higher than other roof system options.
So how does this integrated, stage driven roof system work?
To understand the process, we first have to look at how traditional repairs work on your roof and how they fall short of what SureCoat Systems offers.
Roof repairs usually take place in critical areas that are more susceptible to water, sun and aging damage, such as walking paths, parapet walls, equipment areas, ponding water areas, etc. These repairs can be completed with multiple types of products, such as black coatings or mastics.
The problem with black coatings or mastics is that they do not reflect the heat and sun from the building. The constant beating of the sun’s heat causes damage to the roof by drying it out, cracking and splitting resulting in the loss of its flexibility, leading to leaks and other roof failures. These materials also need to be removed prior to a new repair or a new roof being installed. Their “quick fix” approach does exactly and only that, quickly and temporarily fixes a problem.
The advantage of the SureCoat Systems repair and restoration products is that they have the ability to reflect the sun’s heat away from the roof, which impedes it from drying out or cracking. Our products are part of a Class 1 waterproofing system that act as a base coat and can be coated over when building the next stage of a fully warranted roof when installed by an approved contractor.
The approach is simple, these phases take place in stages, and as your budget allows:
The first phase is to contact a SureCoat Systems approved contractor to inspect your roof. Following the inspection, use the inspection report to identify and address critical areas of the roof such as walk paths, scuppers, seams, ponds, fasteners or other areas that are in need of repair.
Once the repair phase is completed and when your budget is in place, address the remaining areas of the roof (not previously addressed or as recommended by your roofing contractor). The final phase of your new roof is to clean and top coat the roof making it eligible for a warranty upon completion.
By following these phases, in stages, your repair dollars aren’t wasted, and previous repairs are tied into each other by simply cleaning and starting the next phase. Once the entire roof is completed, the end result will be a beautiful, seamless, fully restored and warranted roof.


Call SureCoat Systems 877-823-7873 or click today for an Approved Contractor in your area, and get ahead of the curb to protect and prolong the life of your existing roof. Let your repairs be the start of your new roof!
Related Links
Gravel Roof Repairs & Restorations Made Easy With SureCoat Systems
Avoid costly tear-offs by restoring your existing roof to ‘Better than New’ condition.
When it comes to existing gravel roofs, there are not many options for repairing them long-term. Often, a roof tear-off or SPF foam encapsulation are the only options suggested by roofing contractors. Unfortunately, both of these options are very expensive. Even foam roofs require a waterproof coating like SureCoat to protect them from moisture and UV. The SureCoat Roof System can be used directly over a spud gravel roof as a partial or full roof restoration system.
Another issue roofing contractors face, is that once a gravel roof is weathered and brittle, walking on the roof to perform leak repairs only increases the chances of developing more roof leaks since it is quite easy for the gravel to puncture the dried-out asphalt membrane during routine roof maintenance. The gravel hides the surface of the roof and often creates a water dam that increases the chances of ponding water for long periods of time. Then, there’s the chance that a leak can even appear to be in the same area of the roof that has already been repaired because water will always find the weakest point of entry and travel. This is why Flat and low-slope gravel roofs are some of the most difficult roof systems to detect and repair roof leaks. Sometimes years are spent chasing leaks prior to finally repairing them successfully.
This is where the SureCoat Roof System comes in as the longest lasting roof coating system for worn out gravel roofs that can add an additional 10-20 years of life back into an existing gravel roof without the need for a roof tear-off. And, not only will it extend the life of your old gravel roof, but once The SureCoat Roof System has been applied by an approved contractor, the new roof could have a non-prorated written warranty that covers leaks in roof ponds, and is renewable with inexpensive maintenance applications at the end of each 10 year warranty period.
Another benefit of applying The SureCoat product is its highly reflective properties which make the SCRS perfect under roof mount solar systems to increase energy capture and return on your investment. Additionally, SureCoat has a higher reflectivity and better self-cleaning ability compared to traditional elastomeric roof coatings, plus its increased durability, and adhesion compared to standard acrylic and silicone roof coatings. SureCoat is a Class 1 waterproof coating, exceeds FM standards for Class 1 fire resistance, windstorm and hail resistance and remains energy efficient as it weathers.
When it comes to gravel roof repair and restoration, SureCoat Systems has the right products to solve your problem and will be your partner throughout the installation process.
Read our Featured Gravel Restoration Project or watch our Gravel Repair Video to learn more about how The SureCoat Restoration System is the right solution for your restoration needs.
Call 877-823-7873 or click today to request pricing, specs, product data or for an Approved Contractor.
Related Products


