HVAC Sheet Metal Roof Repairs
Major HVAC Sheet Metal Roof Repairs…
Research and Development Building in San Diego, California, uses the SureCoat Roof Restoration System to repair major roof damage caused by 8,000 lb. roof mount air handler.
This 60,000 sq. ft. roof is located close to the coast and has constant moisture on the protective drain pan under its roof mount HVAC and air handler units. This constant moisture caused the pans to rust through. When the leaks became obvious to the tenant, they simply put a plastic tarp on the warehouse floor beneath the leaks to protect their merchandise, but they failed to repair the roof and flashings causing the leaks. This led to costly structural damage to the roof substrate.
At this property, the tenant was responsible for roof maintenance and repairs of the building that they occupied. This is an example of the damage that can be caused by poor roof maintenance. In this case the poor maintenance led to a dangerous situation. One particular air handler was 8,000 lbs. mounted on a wood framed equipment curb. The leaks were obvious and coming through the building for a long time before attention was given to the roof to determine the cause of water intrusion.
The metal drain pans under the air handler unit had completely rusted through and this allowed the moisture to drain directly into the support curbs. The moisture then saturated into the plywood roof deck and caused further substrate damage. The roof and plywood deck was rotten and completely deteriorated under the rusted out drain pan. This damage was not known until the unit and pan were removed. By the time this 8,000 lb. air handler was disconnected and craned off, it was nearly falling through the roof.
Coating these drain pans with the SureCoat Roof System prior to
A local SureCoat Systems’ Approved Contractor was hired to perform the roof repairs using the SureCoat Roof System. The customer chose the SureCoat Roof System over other roof coating systems because it creates a waterproof, monolithic seal that is UV stable and renewable. The cross-linked resins of the elastomeric coating allow for adhesion to all types of metal including galvanized, bonderized, mild steel and aluminum in most cases without a primer.
The SureCoat Roof System is a long-term solution for metal HVAC duct, plenum and flashing leak repairs. Sheet metal used to make HVAC duct runs and plenums will rust much like the metal drain pans if left unprotected. The seams of HVAC ducts, roof jacks and other metal on roofs are often sealed with black and gray mastics. These mastics absorb heat, become brittle and split in a short period of time and need constant maintenance to keep the seal watertight. As an alternative, the SureCoat Roof System material is an excellent product to seal metal seams and to protect sheet metal from rust.
Avoid washing your roof repair dollar$ down the drain by asking for the SureCoat Roof System by name!
About-us-flat-roof-coatings
We heard that you wanted to know more About Us
SureCoat Systems® is committed to providing excellent customer support and “green” waterproof materials for commercial and residential flat roofs and exterior walls.
SureCoat Systems offers permanent solutions when other companies give up! Solving problems is what we do best!
SureCoat was created with the focus of serving the multi-billion dollar coating industry. With that in mind, we developed an exclusive line of vertical and horizontal coating products. Originally produced for industrial use, SureCoat has been reformulated and perfected for your residential and commercial real estate.
SureCoat is the ONLY coating that is known to be waterproof from surface to substrate and has a written manufacturer’s material warranty that states it will not fail due to ordinary ponding water caused by natural precipitation. You cannot buy that from any other manufacturer, but you get it FREE by installing a SureCoat Roof System. The SureCoat Wall System has a 10-year warranty for residential homes and commercial properties. SureCoat Roof Systems and the SureCoat Wall System will help to lower cooling and maintenance costs. This savings is significant especially for commercial building owners. Both SureCoat Roof Systems and the SureCoat Wall System act as a heat shield by emitting 93% of heat, never allowing it to penetrate through the coating. SureCoat will not crack, chip, or peel, we guarantee it!
We stand behind our product and have the warranty to prove it! Whether you are a homeowner, contractor, architect, property manager, roofing consultant, or a large or small roofing company, our knowledgeable team is here to support you. Together we can assess your building needs and provide professional specifications that solve the issues pertaining to your project.
The principals of SureCoat Systems’ have 30 years of building experience that is utilized to provide answers to all technical questions about your roof, wall, floor or exterior projects. Understanding building practices and the differences between SureCoat Systems and other restoration systems has helped us to develop product presentations and sales and estimating tools to assist you. Together, we can help our partners grow their business with environmentally friendly, high-performing, quality products and honest, reliable information.
Call us TOLL FREE at 877-823-7873 for samples or info not available online.



