Hail

You Are Here: Home / Archives / Tag / Hail

Strengthen your Flat Roof System

Categories: Tags:
hailstorms 01

Prevent Hail Damage on Your Roofs

Hail can strike in any season, in 2019 alone there were 5,382 major hailstorms according to statistics culled from NOAA’s Severe Storms database. In 2018, 4,610 major hailstorms occurred, resulting in $810 million in property and crop damage.

More than 10.7 million US properties were affected by one or more damaging hail events in 2017 according to Verisk Estimates.

Hail pellets can vary from pea size to 7” in diameter and anything larger than 1-3/4” has the potential to inflict significant damage. All too often, roofs sustain severe damage during a hailstorm but owners and building occupants won’t realize any damage has occurred until their flat or low slope roof begins to leak due to latent damage.

Hail damage to buildings can be seen mostly on the roof and windows, so it’s imperative to check them when the hailstorm passes. Up to 30% of hail claims are dated wrongly for their loss, considering that the damage has been noticed and claims were filed much later (up to 1 year) following the actual damaging hailstorm.

Source: Insurance Information Institute & Rocky Mountain Insurance Institute Association

Keep in mind that often the damage appears to be on the surface and many property owners may think it’s cosmetic, but hail damage can reduce the lifespan of a flat or low slope roof and harm its water shedding capabilities even when it doesn’t look like much.

When replacing your flat or low slope roof, consider using hail-resistant roofing products. The insurance industry has an Underwriters Laboratory standard ranking, the UL 2218 standard. The standard has four impact-level designations that will help you compare products. Roof coverings that show the most resistance earn a Class 4 rating; the least, a Class 1 rating.

A great flat or low slope roofing solution is a Fluid Applied System. A quality fluid applied system will be fully reinforced and highly water resistant to protect the roof structure of the building.  This is accomplished by using high quality resins that will create a perm rating below 0.1 and be rated as a Class 1 waterproof coating.  These systems are applied as a liquid, but cure to form a tough, rubber-like membrane. These types of roof are seamless and are typically considered self-flashing.

A great benefit of liquid applied systems is that small hail will not damage the system because of its elasticity, although large hail stones may damage it, the upside is that coated roofs can be easily repaired with another coat over the damaged area.  Many insurance companies welcome a liquid applied system because of this benefit.

  • The SureCoat Roof System is a liquid single-ply that has been engineered with the highest-grade raw materials and cross-linked resins to provide increased durability and elasticity protecting against the toughest ponding water, high winds and debris. It can be used to repair all levels of damage on metal roofs, built-up roofs, SPF, PVC, TPO, EPDM, Hypalon and other single-ply membranes.
  • The SureCoat Roof System has a perfected elongation of 400%, sustains an elongation of 160% at freezing and has an advanced tensile strength of 2800 psi. ASTM weathered testing results did not show any signs of cracking, splitting, separation or rupture when under examination; magnified 10 times through ASTM hail resistance testing which meets or exceeds FM standards.
  • On top of all that, the SureCoat Roof System has saved clients thousands of dollars on flat and low slope roof repairs and restorations. A great example, we helped a client save about $200,000 with no tear off or replacement necessary.
  • If budget is a concern, tackle your most vulnerable areas and work on the roof in sections, doing repairs or a partial roof project that is proven to protect against further damage ultimately saving time and money for both you and your insurance company.

All in all, SureCoat Systems has been applied to hundreds of flat and low slope roofs across the country where hailstorms are common.  Our coating’s ability to remain flexible, durable and resist damage from future hailstorms can be translated into huge savings for building owners.

Read More about SureCoat and Hail Performance Here

Call a SureCoat Specialist at 877-823-7873 today! We can help you be prepared for the next storm so you can breathe easy knowing your property is protected.

Hail Damage to Single-ply Roofs

Categories: Tags:

FOR IMMEDIATE RELEASE

Date: August 5, 2014

Contact: Jamie Barnett, 877-823-7873, jamie@surecoatsystems.com

 

Hail damage undetected in well formulated single-ply roof membranes in parts of the Western United States.

 

In a recent bulletin published by WSRCA, a Linked In professional group of Roofing Contractors, preliminary reports of latent hail damage went undetected for months and in some cases, years in certain thermoplastic single-ply membranes.

hail damage roof reapair

Harsh climates with extreme temperature variance cause single-ply roofing membranes, specifically PVC and TPO, to deteriorate at a more accelerated rate than the same roofing material performs in other climates with less extreme weather. Unfortunately, these weathered single-ply roofs are more vulnerable to damage caused by hail impact.

 

Latent hail damage is often undetected until further damage has begun to manifest, causing roof leaks, roof failures and roof substrate damage. This type of hail damage is the unseen damage created by the initial impact of hail. Left unprotected through prolonged periods of time, latent hail damage can result in the need for a roof tear-off or re-roof and roofing substrate repairs.

 

Much of the Western US is affected by hail storms. If you are a property owner in an area commonly affected by hail, you know just how costly and inconvenient hail damage can be to your building and even your daily business operations. The cost and inconvenience to have your roof and roofing substrate replaced due to hail damage takes this inconvenience to another level with a potential closing of the business, damaged assets or loss of tenants. Property owners and insurance companies in this part of the country know that they cannot avoid Mother Nature. What many of them are discovering now is a product that can stand up to good ol’ Mother Nature herself!

 

The SureCoat Roof System can be used to repair all levels of hail damage on metal roofs, asphalt shingles, built-up roofs, SPF, PVC, TPO, EPDM, Hypalon and other single-ply membranes The SureCoat Roof System has a perfected elongation of 400% and sustains an elongation of 160% at freezing.  The SureCoat Roof System has an advanced tensile strength of 2800 psi.  ASTM weathered testing results did not show any signs of cracking, splitting, separation or rupture when under examination; magnified 10 times through ASTM hail resistance testing which meets or exceeds FM standards.

 

What this means for property owners and insurance companies: Future hail damage to a SureCoat Roof is rare. In the event that there was future damage or future penetrations made to an existing SureCoat roof, the repairs would be a minimal cost with minimal labor. The continuous bonding properties and cross-linked nature of SureCoat creates a waterproof, monolithic seal that is self-adhered and self-flashing. A SureCoat roof repair melts into the existing SureCoat Roof becoming a part of it, without leaving a cold-joint.

###

SureCoat Project of the Month

Categories: Tags:

Read Online Here: SureCoat Project of the Month

Featured Project of the Month

Plains All American Pipeline, a transportation, storage and terminaling facility of crude oil, used the SureCoat Roof System to save money, man hours and inconvenience.

Replacement of this roof was approximately $70k plus the inconvenience of protecting and storing all their equipment and maintenance tools. One of our certified installers was able to repair and recondition the entire metal roof with a SureCoat Roof System for under $30k. Now the roof is weatherproof and seamless with significantly cooler interior space and a Renewable Leak-Free Warranty!

Hail Damage Roof Repairs

Categories: Tags:

Hail Damage Roof Repair Solutions

 

During storm and hurricane season, hail can be a costly expense across the United States and no roof is completely protected from hail damage. Some roof membranes may have hail rating classifications but not one product has a warranty that covers these Acts of God. Hail both large and small can cause severe and costly damage to a structures roof. An older or more weathered roof is more susceptible to hail damage than a newer roof membrane, especially in the case of asphalt shingles which loose their mineral cap, wear and become brittle.

You can use SureCoat Systems roof coating products to repair hail damage on roofs including Asphalt Shingles, BUR, TPO roofs and PVC roofs and more. TPO and PVC roofs are great candidates for a SureCoat roof repair when there is roof damage caused by hail. Unlike most acrylic roof coatings that will not adhere to TPO and PVC, SureCoat will adhere to almost any roof substrate, in most cases with out a primer.

SureCoat liquid applied coatings are FM approved for hail susceptibility, wind driven rain, water leakage resistance, foot traffic, and more under Factory Mutual Standard 4470 Class 1 classification. SureCoat coatings are ASTM tested and found to exceed all industry standards, including Southern California, with the strictest regulations Nationwide. SureCoat flat roof coatings have a UL 790 Class A rating, are Title 24 compliant and SPFA accredited. The resins in SureCoat roof coatings are engineered, tested and proven to have better hail resistance and resistance to foot traffic than typical elastomeric roof coatings.

As of April 2010, according to Factory Mutual Standard 4470, Section 4.4.1, Conditions of Acceptance for Hail Damage Resistance are as follows: when tested the coating membrane both weathered and un-weathered did not show any signs of cracking, splitting, separation or rupture under examination when magnified 10 times.

Other testing performed includes water leakage, where SureCoat roof coatings passed FM Approvals by means of ASTM testing D7281. This testing showed no signs of leakage after 7 day testing. For foot traffic resistance there was no sign of tearing or cracking of the SureCoat protective roof membrane material when tested according to FM Approvals standards.

These approvals and accreditations make SureCoat Roof Systems ideal for your existing roof with hail damage.