It may seem a little SPOOKY to you, but we are not SCARED!The SureCoat Roof System was installed as a waterproofing protection and prevention system to the underground sump of the Fire Training Tower for the City of Downey.
Downey, California – The SureCoat Roof System was used by local approved contractor, JemStar Construction, to waterproof the underground water holding sump and the inside walls for the City of Downey’s Fire Training Tower. The city’s main concern was to keep water from permeating through the water containing sump and into the surrounding ground.
Fire Training Tower in the city of Downey, California, USA.
This was not the City of Downey’s first attempt to eradicate this issue. The sump of this concrete tower had hairline cracks that were allowing for water seepage through all sides of the walls. The products previously used as an attempt to stop the issue failed.
Other cities have this same problem with their fire training towers. Some are so bad that the water intrusion into the ground has caused erosion to the point that the fire training towers are leaning. This water erosion has caused the surrounding ground to become unstable and unable to support the tower any longer in this condition. The training towers that have reached to this point must undergo more major construction to restabilize the ground before waterproofing the sump and putting the training towers back in service.
Water Holding Sump BEFORE the SureCoat Roof System
SureSkrub, SureCoat and Poly-Mesh create the SureCoat Roof System. This same waterproof roof system has been tested and proven TRUE for other uses as well. Contractors have experimented with various uses of SureCoat and invented new solutions using this same Field Tested and proven waterproofing system.
Underground concrete holding walls and sump waterproofed with the SureCoat Roof System.
The SureCoat Roof System has been used for containment systems, walls and decking in addition to flat roofs and low-sloped roofs. This SureCoat Systems’ Approved Contractor used their SureCoat roofing experience for this unique waterproofing solution.
Do you have a SureCoat waterproofing story that you want to tell us about? Share it with us and we’ll share it with everyone!
About the Product: The SCRS is flexible enough to bridge cracks, withstand the expansion and contraction caused by movement, vibration and thermal cycling, and retain its tightly cross-linked molecular structure; remaining waterproof, UV stable and energy efficient. “One Bucket, Thousands of Uses”, Download the brochure today.
Don’t be AFRAID to try the SCRS for your specialty project today. If you’re not SURE, CALL and SPEAK with a Product Specialist today at 877-823-7873.
Throughout the Western United States, cool roofs are used to reduce energy costs, prolong the life of traditional roofs and lower roof maintenance costs.
Anaheim, CA – Are you interested in reducing your energy costs? Do you want to extend the life of your roof and save thousands over a tear-off and the “unknown factor” once your roof is removed? Then you want a cool roof.
COOL ROOFS INSUMMERHEAT
All over the globe, throughout the Western United States and especially in the Mid-West, cool roofs are used to reduce energy costs, prolong the life of traditional roof systems and lower roofing maintenance costs.
Cool roofs have proven to save on energy costs, especially cooling costs in the hot summer months. But not all cool roofs are created equal. Be careful not to flush your energy saving investment down the “roof drain”. Manufacturers of acrylic roof coatings and silver or aluminum roof coatings DO NOT recommend these products be installed over low-slope roofs with ponding water (water that sits 48 hours after rain). If you are a commercial property owner or commercial roofing contractor, you know that all roofs pond water to some degree. Most commonly these ponding areas are in the drains and waterways and more commonly than not, throughout the field of the roof. Look at the figures below and think about this… How long will your “cool roof” remain a “cool roof”?
Typically installed over an emulsion and fiber reinforced base coat, the waterproofing portion of this type of roof restoration system, acrylic cool roof coatings and reflective aluminum coatings just don’t hold up to moisture and UV. These types of roof coatings can only reflect the UV while they are on the roof. Once they peel, crack and lift, you are left with a hot, heat-absorbing black roof that does not contain any UV resistance.
The photos show typical results of acrylic roof coatings, even those used in conjunction with a waterproofing emulsion base coat. The roofs displayed in the photos above were only 6 months to 3 years old at the time the photos were taken. The manufacturers of these coatings specifically state in their installation specification, “not to use in areas where water ponds”.
This information was either not passed along to the contractor or ignored by the installing contractor. These emulsion and acrylic roof systems are inexpensive because the materials are inexpensive. However these systems are far from free. The majority of the costs for these types of roofing systems are the labor costs. These systems are not designed to be sustainable cool roofs. Once the white coating or silver coating peels away, the cool roof and all its energy saving, heat emitting values are completely lost.
The warranty on these roofing materials claim the roof will be leak free for a period of time but not a cool roof for any period of time. The black emulsion is the waterproofing, not the white acrylic. The reflective acrylic coatings always peel up on commercial low-slope roofs and industrial flat roofs, exposing the emulsion waterproofing. The Ultra-Violet (UV) and thermal protective membrane is gone and the roof is no longer a cool roof.
The upside: The SureCoat Roof System is a completely seamless, renewable and sustainable cool roof membrane. A SureCoat Roof will remain a waterproof roof as well as a cool roof for the entire life of the warranty. SureCoat Systems manufacturer’s written material warranty states that “The SureCoat Roof System will not leak due to ordinary ponding water caused by natural precipitation”.
Since the SureCoat Roof is a solid core of a single material, as the roof wears, the heat emitting thermal values and UV reflective values remain throughout the life cycle of the roof. When a SureCoat Roof becomes dirty, a simple cleaning with SureSkrub, a biodegradable cleaner, will turn a SureCoat Roof bright white again which will recapture nearly all the initial reflectivity. You cannot scrub any other coating system without it lifting as shown in the pictures below.
The thermal heat emitting values of a SureCoat roof always remain exceedingly high at 93%, creating a Solar Reflective Index (SRI) of 102 after aged and dirty. SureCoat was engineered for large commercial low-slope roofs and large industrial flat roofs that pond water, as all large low-slope roofs pond to some degree.
DON’T LET THIS HAPPEN TO YOU… PROTECT YOUR ASSETS AND YOUR INVESTMENT WITH A PRODUCT THAT YOU ARE SURE ABOUT. FIELD TESTED AND MOTHER NATURE APPROVED!
Do you know how to read and evaluate the engineering data sheets for the materials that you are using?
Don’t be fooled by a saleman….Learn how to read engineering data sheets. Every product has an engineering data sheet, but that doesn’t mean that every contractor reads it. I have been hearing it more and more lately. Contractor installs a system as specified by their rep and it doesn’t work! 9 times out of 10 this is because the product is not engineered to do so. Emulsion acrylic systems especially. They will lose their reflective energy-efficient top coat if under water for any prolonged length of time.
It is a wet stormy season for many nationwide and it is hard enough to get work. Then, to install a system that can’t hold up through its first season….so sad.
If you are a contractor, roofer or even a property owner doing your own product research, we can teach you how to read the engineering data sheets. Find out the truth about the products you are using when you can read and understand the engineering data yourself!
Helpful Hint: You are looking for ASTM testing for wind-driven rain, perm rating, fire and hail damage resistance. You want the engineering data to reflect a passing test.
Contact us here to request SureCoat Systems products engineering data sheets. If it doesn’t make sense to you yet, it will when we speak with you.