Are you frustrated with the way paints and coatings for exterior wall surfaces perform? Most manufacturers offer warranties that cover only manufacturing defects. They are not held accountable for the way their products perform. The few products that do have a “warranty” actually have pages of exclusions that include any and all cracks. Keeping water out of the stucco, wood, concrete, masonry, mortar joints and brick is impossible with cracks.
SureCoat Systems is a different kind of company that offers environmentally friendly protective coating options. Backed by almost 30 years of construction and polymer chemistry experience, only exceptionally superior products are engineered through SureCoat Systems and offered to the building and restoration industry. SureCoat Systems’ products address and correct problems that other coating companies are still working to figure out. The vast chemical engineering and manufacturing experience of elastomeric, waterproof, thermal emitting, and UV stable coatings has put SureCoat Systems far ahead of the competition. These coatings have been in use long before cool walls were heard of.
StrucSureCoat
StrucSureCoat is an epoxy hybrid cool wall coating that forms a monolithic, elastomeric waterproof membrane that expands and contracts with thermal cycles without becoming brittle or tearing. StrucSureCoat emits 93% of heat back into the atmosphere. A cooler wall means lower interior temperatures and lower cooling costs. StrucSureCoat is backed by a written manufacturer’s warranty that states StrucSureCoat will not chip, peel, or flake. Best of all, cracks up to 1/16” are covered! StrucSureCoat is self-priming and adheres to all types of existing substrates including stucco, wood, masonry, metal, and vinyl. StrucSureCoat has a smooth finish that will take on the appearance of the surface over which it is applied. It is extremely thick, 18-23 DFT, which allows it to move without tearing. The depth of the ridges in wood and texture on other building materials may be slightly less pronounced due to the thickness of this protective membrane.
Clear Waterproof Sealers - SS-PWR
SS-PWR is a penetrating non-membrane forming waterproofing for use over a natural building material such as concrete, brick, block, or other masonry material. It is recommended that SS-DPD densifier is used prior to waterproofing/sealing with SS-PWR to stop any vapor moisture drive. This will prevent any moisture from penetrating the surface and protect the materials from water intrusion, efflorescence, dirt, oil absorption or absorption of other liquids. New concrete should use the cure and seal formula of this product; SS-PWR-CS. SS-PWR-CS is a super compliant VOC product for use in any AQMD area. Call for more information on the right product for your project.
This is a milky, low viscosity coating that dries clear. It can be rolled or sprayed with a Hudson sprayer. Available in 5 gallon pails and 55 gallon drums (upon request and ample lead time).
